All The Way Outdoor GPS Watch Waterproof Sport Watches GPS Tracker  Compass Automatic Readier Temperature Speed Navigation Latitude Longitude

 

Key words:

GPS Watch

Outdoor Sport Watch

Fashion Waterproof Watch

 

Specification:

1.Case material: ABS

2.Band material: PU

3.Watch surface: High strength glass

4.Watch clasp: steel

5.Watch Size: 48mm for diameter, 15.1mm for thickness, 27mm for length.

6.Watch Core: Adopt US SIRF III chip

7.Net Weight: approx 115g

8. Watch screen: LCD, no backlight.

9. Color: Pink/Black/Green/Blue/Camouflage, please choose color.

 

Features:

1. The hour, minute, day and month at the same screen.

2. Waterproof: 3ATM, donot support using any watch button in water.

3. Built-in 300mA rechargeable lithium battery, approx 8 hours for GPS working, standby approx 5 months only for time function.

4. Compass: precision to 1°C

5. Automatic readier: global 24 time zones automatic time setting.

6. Altimeter: show the current location altitude.

7. Speedometer: show the current speed

8. Thermometer: show the local temperature

9. GPS navigation function can show direction and distance, deviation about 4 meters. 

Example: if you stored the camping site position to your GPS watch before you hiking, backpacking, canoeing. when you return to camping site, your watch will show you the distance and direction between you and the camping site. )

10. It can set 3 target places and 20 tracking points, it can be stored although power off.

11. Storage tracking points and markers at map

12. Show the longitude and latitude for record data and for help

13. It can input longitude and latitude.

 

Package include:

1 x GPS watch

1 x US power charger

1 x USB cable

1 x Manual in English and Chinese

1 x CD Rom Software

 

 

Tips 

1.Charging 

Screw out axial top at 3 o’clock position while charging. Then, put back the axial top when finishing the charge; don’t force pulling as the metal is set inbuilt plastic shell, the screw will be ruined if over using the force. 

Check if the cord is connected with watch while charging. If not well connected, the cord should be re-plug by changing a direction, and this can be checked by seeing the red indicator. The red indicator will light up no matter it is connected with 220V power source or watch; the time of charging will be around one hour. It is meaningless to over charge. 

 

2.Receiving Signals 

As the watch receives the signal from the satellite, the shielding effect could be possible when facing concrete or cement. Therefore, it would be better to receive signals at wide space area. Whereas by the woods, overcast or rainy day, umbrella, etc., the impact on the effect will be minimal. Since the antenna is inbuilt, below the trade mark ALLTHEWAY at 12:00, it should be facing the sky while receiving the signal and make sure there is no anything covered on it.

 

3.Compass 

Actually, the Compass is named North Arrow abroad, therefore, the arrow above is pointing the north, and don’t worry about the figure inside as it is the intersection angle between earth magnetic sensor and surface. However, when the figures are 0, 90, 180 and 270 (which can be divided entirely by 90), the arrow should point right north (zero divergence ) 

As the signal received is from the earth magnetic sensor of the compass, the calibration is needed once the location is changed (the distance should be over 500 kms ) 

 

4.Application 

Since the watch has no switch but only standby function, the time and date interface means it is in the working status; if applying other functions, get back to the function of time and date after checking the information. 

The product has a warning of lower power (this can sustain 3 days with such a warning); under this circumstance, GPS cannot be used (it can only be functioned as watch ); the product can only be used by pressing key T and key C (for manual timing). It reminds you that the product needs charging. 

Some customers received the product without display on the surface. This is because the power is run off during the post by frequent vibration on the keys in the process. Just connect it with charging. 

Just like a new cellphone, the new watch needs one time complete discharging and charging, through which the battery can be durable.